User Manual Q&AAnswer
Dec 12, 2024 - 11:57 PM
Sure! Here are the step-by-step instructions for installing the Pyle PLMRKT46BK Marine Headunit Receiver Speaker:
1. Make sure the ignition is turned off and disconnect the cable from the boat's battery's negative (-) terminal.
2. Disconnect the wire harness and the antenna.
3. Lift the left or right top corner of the plastic outer trim ring and pull it out to remove it.
4. Insert the two bracket keys into the left and right side of the chassis to separate the chassis from the housing.
5. Insert the mounting sleeve into the dashboard and bend the mounting tabs out with a screwdriver. Make sure the lock lever is flush with the mounting sleeve and does not project beyond it.
6. Insert the receiver into the mounting sleeve.
7. Connect the wires as illustrated in the wiring diagram provided in the manual.
8. Install the plastic outer trim ring.
Please refer to the user manual for more detailed information and illustrations on the installation process.
Add New Comment