User Manual Q&AAnswer
Dec 12, 2024 - 11:48 PM
To install and mount the Garmin Striker Plus 5cv Fishfinder on your boat, please follow the steps outlined in the Owner's Manual. Here is a step-by-step guide:
1. Determine the mounting location: Choose a suitable location on your boat's console or dashboard where the fishfinder will be easily visible and accessible.
2. Prepare the mounting surface: Ensure the mounting surface is clean and dry. If necessary, use a suitable cleaning agent to remove any dirt or residue.
3. Attach the mounting bracket: Use the included mounting bracket and screws to attach it to the chosen location. Make sure the bracket is securely fastened.
4. Connect the power cable: Connect the power cable to the back of the fishfinder unit. Route the cable to the battery or a suitable power source on your boat.
5. Install the transducer: Determine the best location for the transducer, preferably in an area with minimal turbulence. The transducer should be mounted below the waterline. Follow the instructions in the manual for transducer installation, which may involve drilling holes and using adhesive.
6. Connect the transducer cable: Connect the transducer cable to the back of the fishfinder unit. Route the cable along the boat's hull, securing it with cable ties if necessary.
7. Test the installation: Before finalizing the mounting, power on the fishfinder and ensure it is functioning properly. Check for a clear display and accurate readings.
8. Secure the fishfinder unit: Once you are satisfied with the installation and functionality, secure the fishfinder unit onto the mounting bracket. Ensure it is firmly attached and does not wobble.
For more detailed instructions and illustrations, please refer to the Garmin Striker Plus 5cv Fishfinder Owner's Manual provided above.
Add New Comment