User Manual Q&AAnswer
Dec 12, 2024 - 09:44 PM
To pair the Garmin 010-02376-00 Cycling Rearview Radar with your Garmin Edge 1030, follow these steps:
1. Bring the Edge device within range (3 m) of the radar sensor.
2. Turn on the Edge device.
3. Select "Sensors" from the menu.
4. Select "Add Sensor" and then "Search All".
5. While the Varia RTL515/RTL516 device is turned off, hold the device key for 2 seconds to enter pairing mode. The status LED will flash purple, and the taillight will turn on. The device will remain in pairing mode for 5 minutes or until you press the device key.
6. Select your sensor from the list of available devices and select "Add".
Once the sensor is paired with your Edge device, the sensor status will show as "Connected" and the radar and bike light status icons will appear solid on the top banner of the home screen.
Please refer to the Garmin 010-02376-00 Cycling Rearview Radar User Manual for more detailed instructions and troubleshooting tips.
Add New Comment