User Manual Q&AAnswer
Dec 12, 2024 - 09:34 PM
To program frequencies into the Uniden Bearcat BC125AT Handheld Scanner, follow these steps:
1. Turn on the scanner by rotating the volume/power xxxx clockwise.
2. Press the "MANUAL" button to select the manual programming mode.
3. Use the arrow keys to select the desired channel where you want to store the frequency.
4. Press the "PROGRAM" button to enter the programming mode.
5. Enter the desired frequency using the numeric keypad. For example, to enter 155.475 MHz, press "1," "5," "5," "." (decimal point), "4," "7," and "5."
6. Press the "ENTER" button to store the frequency in the selected channel.
7. Repeat steps 3-6 to program additional frequencies.
8. To listen to a programmed frequency, use the arrow keys to select the desired channel and press the "MANUAL" button.
Note: The Uniden Bearcat BC125AT Handheld Scanner can store up to 500 frequencies in its memory. Refer to the owner's manual for more advanced programming options, such as setting the modulation type, adding a frequency offset, or enabling the Close Call feature.
Add New Comment