User Manual Q&AAnswer
Dec 12, 2024 - 09:18 PM
To program the EWO'S EWOS1330A Universal Remote Control for your TV, please follow these steps:
1. Make sure you have inserted the required 2 AA batteries into the remote.
2. Turn on your TV manually using its power button.
3. Aim the EWO'S EWOS1330A Universal Remote Control at your TV.
4. Press and hold the "TV" button on the remote until the LED indicator light turns on.
5. Enter the 3-digit code for your TV brand using the number buttons on the remote. You can find the code for your specific TV brand in the user manual or by searching online for the EWO'S EWOS1330A Universal Remote Control code list.
6. After entering the code, release the "TV" button. The LED indicator light should turn off.
7. Test the remote by pressing the power button. If the TV turns off, the programming was successful. If not, repeat steps 4-6 with a different code until you find the correct one for your TV.
8. Once the TV is successfully programmed, you can use the EWO'S EWOS1330A Universal Remote Control to control the power, volume, and channels of your TV.
Note: If you cannot find a code that works for your TV, the EWO'S EWOS1330A Universal Remote Control also has a learning capability. This means you can teach it to mimic the functions of your TV's original remote by capturing and storing the IR signals. Refer to the user manual for instructions on how to use the learning function.
For more detailed instructions and troubleshooting tips, please refer to the user manual that came with the EWO'S EWOS1330A Universal Remote Control.
Add New Comment