User Manual Q&AAnswer
Dec 12, 2024 - 09:12 PM
Sure! Here are the step-by-step instructions to set up the NETGEAR DGND4000 (N750) WiFi DSL Modem Router Premium:
1. Connect to the Internet:
- If you have a DSL connection, make sure your DSL service is active before installing the modem router. You will need your DSL username and password, as well as your telephone number or DSL account number.
- If you have a cable or fiber connection, connect your computer to the modem router using an Ethernet cable.
2. Connect to ADSL (if connecting directly to a DSL line):
- Install an ADSL microfilter between the phone line and the phone to filter out DSL interference.
- Connect the ADSL port of the modem router to the ADSL port of the microfilter.
3. Connect to cable or fiber (if connecting to a cable/fiber modem):
- Cable your computer to the modem router using an Ethernet cable.
4. Power on your router:
- Connect the power adapter to the router and plug it into an outlet.
- Wait until the 2.4 GHz Wireless LED turns solid green.
5. Open a browser:
- Enter http://routerlogin.net in the address bar of your browser.
- If you don't see the genie screen, close and reopen the browser and try again.
6. Follow the NETGEAR genie installation wizard:
- Click "Next" to allow the genie to help you.
- Follow the steps to set up your Internet connection.
- If your DSL Internet service requires a username and password, you will be prompted to enter this information.
7. Set up wireless security:
- The modem router comes with preset wireless security settings printed on the label at the bottom of the product.
- It is recommended not to change the preset WiFi network name (SSID) and network key (password) for maximum security.
8. Add wireless devices to the network:
- You can use either the manual method or the Wi-Fi Protected Setup (WPS) method to add wireless devices to your network.
- Follow the instructions provided in the manual for each method.
9. Access the router to make changes:
- To view or change the router settings, log in to the router using a web browser.
- Enter www.routerlogin.net or www.routerlogin.com in the address field.
- Enter "admin" for the user name and "password" for the password.
10. Troubleshooting:
- If you encounter any issues, refer to the troubleshooting section in the manual for possible solutions.
Please note that these instructions are a summary of the installation process. For detailed instructions and additional features, refer to the complete user manual available online at http://downloadcenter.netgear.com or through a link in the modem router's user interface.
Add New Comment