User Manual Q&AAnswer
Dec 12, 2024 - 08:36 PM
The setup process for the ALLIMITY L5B83H (2nd GEN) Replacement Voice Remote Control may vary depending on the specific streaming device or smart TV you are using. However, here are some general steps that can guide you through the pairing process:
1. Make sure your streaming device or smart TV is powered on and within range of the remote.
2. Remove the back cover of the ALLIMITY L5B83H remote and insert two AAA batteries (not included).
3. Press and hold the Home button on the remote for 8-30 seconds until the remote's LED starts flashing quickly in amber.
4. While the LED is flashing, the remote should enter pairing mode. At this point, the remote should automatically pair with your streaming device or smart TV. If it doesn't pair automatically, follow the on-screen prompts on your device to complete the pairing process.
5. Once the pairing is successful, you should be able to use the ALLIMITY L5B83H remote to control your streaming device or smart TV.
Please note that these steps are general guidelines, and the specific instructions may vary depending on your device. It's always recommended to refer to the user manual provided with your streaming device or smart TV for detailed instructions on pairing a replacement remote control.
Add New Comment