User Manual Q&AAnswer
Dec 12, 2024 - 08:34 PM
Setting up the Angrox 1301 Universal Remote Control is typically straightforward. Here are the step-by-step instructions:
1. Insert Batteries: Open the battery compartment on the back of the remote and insert two AA batteries, making sure to match the positive and negative terminals correctly.
2. Turn on the TV: Use the power button on your TV or its original remote to turn on the TV.
3. Point the Remote: Point the Angrox 1301 Universal Remote Control towards the TV.
4. Press and Hold Set-Up Button: Press and hold the "Set-Up" button on the remote until the LED indicator light turns on.
5. Enter Code: Enter the correct code for your TV brand using the number buttons on the remote. You can find the code list in the user manual that came with the remote or refer to the manufacturer's website for a list of codes.
6. Test the Remote: After entering the code, press the power button on the remote to test if it turns off the TV. If it does, the setup is successful. If not, repeat steps 4 and 5 with a different code until you find the correct one.
7. Additional Programming: If you want to program the remote to control other devices, such as a DVD player or sound system, refer to the user manual for instructions on how to enter the corresponding codes.
8. Enjoy: Once the setup is complete, you can now use the Angrox 1301 Universal Remote Control to operate your TV and other compatible devices.
Note: If you encounter any issues during the setup process or need further assistance, refer to the detailed instructions provided in the user manual that came with the remote control.
Add New Comment