How can I set up my NETGEAR RAX40 Nighthawk AX4 4-Stream AX3000 WiFi Router for the first time? (Netgear RAX40 Nighthawk AX4 4-Stream AX3000 WiFi Router User Manual)

Answer

manuals.plus

Dec 12, 2024 - 05:53 AM

To set up your NETGEAR RAX40 Nighthawk AX4 4-Stream AX3000 WiFi Router for the first time, follow these steps:

1. Connect the router to your modem: Use an Ethernet cable to connect the Ethernet port on your modem to the yellow Internet port on the router.

2. Power on the router: Connect the power adapter to the router and plug it into an electrical outlet. Press the power button on the back of the router to turn it on.

3. Connect to the router: On your computer or mobile device, go to the list of available WiFi networks and find the network name (SSID) of your router. The default SSID is usually printed on a label on the router. Connect to the WiFi network.

4. Launch a web browser: Open a web browser on your connected device and enter http://www.routerlogin.net or http://www.routerlogin.com in the address bar. Press Enter.

5. Log in to the router: You will be prompted to enter the default username and password. The default username is admin, and the default password is password. Enter these credentials and click or tap the Log In button.

6. Set up the Internet connection: The router will guide you through the process of setting up your Internet connection. You may need to enter your ISP's login credentials or choose the appropriate connection type.

7. Customize your WiFi settings: Once the Internet connection is established, you can customize your WiFi network settings, such as the network name (SSID) and password. You can also configure advanced settings if desired.

8. Complete the setup: After configuring your WiFi settings, review the summary page and click or tap the Finish button to complete the setup process.

For more detailed instructions and troubleshooting information, refer to the user manual provided with your NETGEAR RAX40 Nighthawk AX4 4-Stream AX3000 WiFi Router.