How do I set up the NETGEAR Centria N900 Dual Band Gigabit Wireless Router for the first time? (Netgear Centria N900 Dual Band Wireless Router User Manual)

Answer

manuals.plus

Dec 12, 2024 - 05:45 AM


To set up the NETGEAR Centria N900 Dual Band Gigabit Wireless Router for the first time, follow these steps:

1. Connect the router to your modem: Use an Ethernet cable to connect the WAN port on the router to the Ethernet port on your modem.

2. Power on the router: Connect the power adapter to the router and plug it into a power outlet. Press the power button on the router to turn it on.

3. Connect your computer to the router: Use an Ethernet cable to connect your computer to any of the LAN ports on the router.

4. Launch a web browser: Open a web browser on your computer and enter "http://www.routerlogin.net" or "http://www.routerlogin.com" in the address bar. Press Enter.

5. Log in to the router: The default username is "admin" and the default password is "password". Enter these credentials and click the "Log In" button.

6. Follow the setup wizard: The setup wizard will guide you through the initial configuration process. It will prompt you to set up a new password, select your time zone, and configure your internet connection.

7. Complete the setup: Once you have completed the setup wizard, the router will save the settings and reboot. After the reboot, you will be connected to the internet.

For more detailed instructions and troubleshooting information, refer to the NETGEAR Centria N900 Dual Band Gigabit Wireless Router User Manual provided above.