User Manual Q&AAnswer
Dec 12, 2024 - 05:44 AM
To set up the Linksys E3500 Wi-Fi Wireless Dual-Band Router, you can follow these steps:
1. Connect the router to your modem: Use an Ethernet cable to connect the yellow Internet port on the router to the Ethernet port on your modem.
2. Power on the router: Connect the included AC power adapter to the power port on the router and plug it into a power outlet. Press the power button on the router to turn it on.
3. Connect your computer to the router: Use an Ethernet cable to connect one of the blue Ethernet ports on the router to the Ethernet port on your computer.
4. Access the router's web-based utility: Open a web browser on your computer and enter "192.168.1.1" in the address bar. Press Enter to access the router's web-based utility.
5. Log in to the router: The router will prompt you for a username and password. By default, the username is blank and the password is "admin". Enter the credentials and click OK to log in.
6. Run the setup wizard: Once logged in, the router's web-based utility will guide you through the setup process. Follow the on-screen instructions to configure your network settings, such as the Internet connection type and wireless network name (SSID) and password.
7. Save the settings: After completing the setup wizard, review your settings and click Save or Apply to save the changes.
8. Connect your devices to the wireless network: Use the wireless network name (SSID) and password you set during the setup process to connect your devices, such as smartphones, tablets, and laptops, to the wireless network.
Note: For more detailed instructions and troubleshooting tips, refer to the Linksys E3500 Wi-Fi Wireless Dual-Band Router User Manual.
Add New Comment