User Manual Q&AAnswer
Dec 12, 2024 - 04:14 AM
To set up the RBK30 Orbi system, you have two options: using the NETGEAR Orbi app or a web browser. Here are the steps for each method:
Using the NETGEAR Orbi app:
1. Scan a QR code or search for NETGEAR Orbi in the Apple App Store or Google Play Store.
2. Download and launch the NETGEAR Orbi app on your mobile device.
3. Follow the prompts in the app to set up your router and satellite.
Using a web browser:
1. Unplug your modem and remove and reinsert the backup battery if it uses one.
2. Plug the modem back in.
3. Use the included Ethernet cable to connect your modem to the yellow Internet port on your router. If you want to connect your router to an existing gateway, we recommend turning off your existing gateway's WiFi.
4. Plug in your router and wait for the Power LED on the back of the router to light green. If it doesn't light up, press the Power On/Off button.
5. Wait for the router's ring LED to light white.
6. Place your satellite, plug it in, and wait for the satellite's ring LED to light blue or amber. If it lights magenta, move the satellite closer to the router.
7. Connect your computer or mobile device to the router or satellite using an Ethernet or WiFi connection.
8. Launch a web browser and visit orbilogin.com.
9. Follow the prompts in the web browser to complete the setup. If prompted, enter the username (admin) and password (password).
For more detailed instructions and troubleshooting, refer to the NETGEAR RBK30 Orbi Whole Home Mesh WiFi System Quick Start Guide.
Add New Comment