User Manual Q&AAnswer
Dec 12, 2024 - 04:09 AM
To set up the NETGEAR RAX15 (AX1800) Wireless Wifi 6 Router, follow these steps:
1. Connect the router to your modem: Use the Ethernet cable provided to connect the WAN port on the router to the modem.
2. Power on the router: Plug the power adapter into the router and connect it to a power outlet. Press the power button to turn on the router.
3. Connect your device to the router: Use a Wi-Fi enabled device (such as a computer, smartphone, or tablet) to connect to the Wi-Fi network named "NETGEAR" or the network name and password provided on the router label.
4. Configure the router settings: Open a web browser on your device and enter "www.routerlogin.net" or "www.routerlogin.com" in the address bar. This will take you to the router's web interface.
5. Log in to the router: Enter the default username and password (admin for both) to log in to the router's web interface.
6. Follow the setup wizard: The setup wizard will guide you through the initial configuration process. You may need to enter your internet service provider (ISP) login details and set up a Wi-Fi network name and password.
7. Customize your settings: Once the basic setup is complete, you can customize advanced settings such as guest networks, parental controls, and security options.
For more detailed instructions and troubleshooting tips, refer to the user manual provided with the router or visit the NETGEAR support website.
Add New Comment