How do I set up the Tenda RX3 AX1800 Dual-Band Gigabit Wi-Fi 6 Router? (Tenda RX3 AX1800 Dual-Band Wi-Fi 6 Router Specifications DataSheet)

Answer

manuals.plus

Dec 12, 2024 - 02:46 AM


To set up the Tenda RX3 AX1800 router, follow these steps:

1. Connect the router to your modem using the provided Ethernet cable. Plug one end of the cable into the WAN port on the router and the other end into the Ethernet port on your modem.

2. Connect your computer or mobile device to the router using Wi-Fi or an Ethernet cable. If using Wi-Fi, locate the default Wi-Fi network name (SSID) and password printed on the router's label.

3. Open a web browser and enter "http://tendawifi.com" or "http://192.168.0.1" in the address bar. Press Enter.

4. You will be prompted to enter the default username and password. The default username is "admin" and the default password is also "admin". Enter these credentials and click Login.

5. Follow the on-screen instructions to complete the initial setup wizard. You will be asked to create a new password for the router's administration interface.

6. Configure the wireless settings, such as the SSID (network name) and password, to secure your Wi-Fi network. You can also enable features like guest network access and parental controls if desired.

7. Save the settings and wait for the router to apply the changes. Once the settings are saved, your Tenda RX3 AX1800 router should be set up and ready to use.

For more detailed instructions and advanced configuration options, refer to the user manual provided with the router or download it from the official Tenda website.