User Manual Q&AAnswer
Dec 12, 2024 - 01:46 AM
To set up the EnGenius EnStation5-AC AC867 5GHz Wireless Access Point, please follow the steps below:
1. Connect the EnStation5-AC to your computer using an Ethernet cable.
2. Open a web browser on your computer and enter the default IP address of the EnStation5-AC (192.168.1.1) in the address bar.
3. You will be prompted to enter a username and password. The default username is "admin" and the default password is also "admin". Enter these credentials and click "Login".
4. Once logged in, you will be directed to the Dashboard page. Click on the "Wizard" tab.
5. In the Wizard page, select your desired operation mode (Access Point, Client Bridge, or WDS Bridge) and click "Next".
6. Configure the wireless settings such as SSID (network name), security mode, and password. You can also adjust other advanced settings if needed. Click "Next" when finished.
7. Review the summary of your settings and click "Finish" to apply the changes.
8. The EnStation5-AC will reboot and the new settings will take effect.
For more detailed instructions and information, please refer to the EnGenius EnStation5-AC AC867 5GHz Wireless Access Point User Manual provided above.
Add New Comment