How do I set up the NETGEAR RAX70 Nighthawk AX8 8-Stream Tri-Band WiFi 6 Router for the first time? (Netgear RAX70 Nighthawk AX8 8-Stream Tri-Band WiFi 6 Router User Manual)

Answer

manuals.plus

Dec 12, 2024 - 01:40 AM

To set up the NETGEAR RAX70 Nighthawk AX8 8-Stream Tri-Band WiFi 6 Router for the first time, follow these steps:

1. Connect your modem to the router:
- Use an Ethernet cable to connect the Ethernet port on your modem to the yellow Internet port on the router.

2. Power on the router:
- Connect the power adapter to the router and plug it into an electrical outlet.
- Press the power button on the back of the router to turn it on.

3. Connect your computer or mobile device to the router:
- Use an Ethernet cable or connect to the router's WiFi network using the default WiFi network name (SSID) and password provided on the router's label.

4. Launch a web browser:
- Open a web browser on your computer or mobile device.

5. Access the router's web interface:
- In the web browser's address bar, enter http://www.routerlogin.net or http://www.routerlogin.com.
- If these addresses do not work, check the router's label for the correct web address.

6. Log in to the router:
- Enter the default username and password provided on the router's label.
- If you have changed the login credentials before, use the updated username and password.

7. Complete the setup wizard:
- Follow the on-screen instructions to complete the setup wizard.
- Set up a new admin password for the router and select security settings for your WiFi network.

8. Connect additional devices:
- Once the setup is complete, you can connect other devices to your WiFi network using the new network name (SSID) and password you set up.

For more detailed instructions and troubleshooting information, refer to the User Manual provided with the NETGEAR RAX70 Nighthawk AX8 8-Stream Tri-Band WiFi 6 Router.