User Manual Q&AAnswer
Dec 11, 2024 - 11:51 PM
To pair multiple DEWENWILS HRLS11B sockets with one remote control, follow these steps:
1. Make sure all the sockets are installed correctly and the light bulbs are securely inserted.
2. Turn on the power switch of each socket.
3. On the remote control, press and hold the "ON" button for 5 seconds until the LED indicator starts flashing.
4. Within 5 seconds, press the "ON" button on each socket you want to pair with the remote control. The LED indicator on each socket will flash to confirm the pairing.
5. Repeat step 4 for each additional socket you want to pair.
6. Once all the sockets are paired, press the "OFF" button on the remote control to test if all the paired sockets turn off simultaneously.
Note: The remote control can be paired with a maximum of 5 sockets. If you want to pair more than 5 sockets, you will need to use an additional remote control.
For more detailed instructions, please refer to the DEWENWILS HRLS11B Remote Control Light Bulb Socket User Manual.
Add New Comment