User Manual Q&AAnswer
Dec 11, 2024 - 11:10 PM
To connect the Music Hall Mini Phono Preamplifier to your turntable and audio system, follow these steps:
1. Locate the RCA input labeled "Phono In" on the preamplifier. This is where you will attach the output from your turntable. The turntable's output is often connected via an RCA cable.
2. Connect one end of the RCA cable to the RCA output on your turntable and the other end to the "Phono In" RCA input on the preamplifier.
3. Next, locate the RCA output on the preamplifier. It is usually labeled "Line Out" or "Preamp Out." This is where you will connect the preamplifier to your audio receiver or amplifier.
4. Connect one end of another RCA cable to the RCA output on the preamplifier and the other end to an available RCA input on your audio receiver or amplifier.
5. If your turntable requires a separate ground connection to eliminate hum or noise, look for a grounding terminal on the preamplifier. Connect the ground wire coming from your turntable to this terminal.
6. If the preamplifier requires power, check the package for an AC power adapter or a USB power input. Connect the appropriate power source to the preamplifier.
7. Finally, turn on the preamplifier using the power switch, if applicable.
By following these steps, you should be able to successfully connect the Music Hall Mini Phono Preamplifier to your turntable and audio system. For more detailed instructions, please refer to the user manual provided with the product.
Add New Comment