User Manual Q&AAnswer
Dec 11, 2024 - 11:03 PM
To connect the VocoPro CDR-1000 Pro to your audio system, follow these steps:
1. Determine the type of audio inputs and outputs available on your mixer and amplifier. The CDR-1000 Pro offers both balanced XLR and unbalanced RCA inputs and outputs.
2. Connect the audio output of your mixer or other audio source to the audio input of the CDR-1000 Pro. If your mixer has balanced XLR outputs, use balanced XLR cables to connect to the balanced XLR inputs on the CDR-1000 Pro. If your mixer has unbalanced RCA outputs, use RCA cables to connect to the unbalanced RCA inputs on the CDR-1000 Pro.
3. Connect the audio output of the CDR-1000 Pro to the audio input of your amplifier or audio system. Again, use the appropriate cables (balanced XLR or unbalanced RCA) depending on the available inputs on your amplifier.
4. Make sure all connections are secure and properly plugged in.
5. Set the CDR-1000 Pro to the appropriate input mode. If you are using the balanced XLR inputs, set the CDR-1000 Pro to Analog mode. If you are using the unbalanced RCA inputs, also set it to Analog mode. If you are using the digital coaxial input, set it to Digital mode.
6. Adjust the recording and playback levels on the CDR-1000 Pro and your audio system to achieve the desired sound levels.
7. Test the connection by playing audio through your mixer or other audio source and recording it onto a CD using the CDR-1000 Pro. Monitor the recording using headphones connected to the CDR-1000 Pro's headphone jack.
Refer to the VocoPro CDR-1000 Pro User Manual for more detailed instructions and troubleshooting tips.
Add New Comment