User Manual Q&AAnswer
Dec 11, 2024 - 10:05 PM
To connect your smartphone to the SOLIS SO-8000 Vacuum Tube Audio System via Bluetooth, please follow these steps:
1. Turn on the audio system by setting the POWER ON/OFF SWITCH located on the back panel to the "I" position.
2. Rotate the SOURCE SELECTOR on the front panel to the Bluetooth position.
3. On your smartphone, enable the Bluetooth function and ensure it is discoverable.
4. The audio system will start searching for a previously paired device. If no active device is found within 10 seconds, the speakers will emit a low-level alert beep tone.
5. On your smartphone, select "SO-8000" from the list of available Bluetooth devices.
6. Once successfully paired and connected, you can play music from your smartphone wirelessly through the audio system.
7. Adjust the volume using the VOLUME CONTROL on the audio system to reach your desired listening level.
Note: If you want to connect the audio system to a new Bluetooth-enabled device while already paired with another device, you need to turn off the Bluetooth function of the currently connected device first before following the steps above to establish a new connection.
For more detailed instructions and troubleshooting tips, please refer to the "Bluetooth Operations" section of the SOLIS SO-8000 Vacuum Tube Audio System User Manual.
Add New Comment