User Manual Q&AAnswer
Dec 11, 2024 - 10:02 PM
To set the alarm on the Memorex MCB428B Aluminum Wireless Clock Radio, follow these steps:
1. Make sure the unit is turned off.
2. Press the "Alarm" button. The display will start flashing.
3. Use the Volume buttons to set the alarm time. Press the buttons to switch between hours and minutes. Take note of the PM indicator if you want to set the alarm for the afternoon.
4. Press the "Alarm" button again, and use the Volume buttons to select "ON" or "OFF" for the alarm.
5. Press the "Alarm" button once more, and use the Volume buttons to choose the alarm type. You can select from 5 different alarm sounds, or choose "TF" (SD Card) or "RAD" (radio) as the alarm sound. If you select "TF" without an SD card inserted, the radio will play when the alarm goes off.
6. Press the "Alarm" button to confirm and set the alarm.
7. When the alarm rings, you can press any button to stop it.
8. If you want to set Alarm 2, press the "Alarm" button until "AL2" appears on the display and follow the same steps as above.
Please refer to the Memorex MCB428B Aluminum Wireless Clock Radio User Manual for more detailed instructions and illustrations.
Add New Comment