User Manual Q&AAnswer
Dec 11, 2024 - 09:52 PM
To set the alarm on the Naxa NRC-181 Bluetooth Dual Alarm Clock, follow these steps:
1. Make sure the power is off before setting the alarms. Press and hold the ALM OFF/SOURCE/POWER button to turn off the power.
2. Press the ALM1/VOL+ button to set the alarm 1 mode to buzzer, radio, or off. The LED indicators will light up for buzzer or radio mode. The alarm is off if all indicators are off.
3. Press and hold the ALM1/VOL+ button; the time for ALARM 1 will begin to flash.
4. Use the /HR and /MIN buttons to adjust the alarm time. Take note of the PM indicator when setting the alarm time.
5. Press the ALM1/VOL+ button again to change the daily repeat mode of ALARM 1.
6. Use the /HR and /MIN buttons to adjust the repeat mode. Select d1-d7 to have the alarm sound every day. Select d1-d5 to have the alarm sound on weekdays only (e.g., Monday to Friday). Select d6-d7 to have the alarm sound on weekends only (e.g., Saturday and Sunday).
7. Press the ALM1/VOL+ button to save and exit the setting mode for ALARM 1.
8. To set ALARM 2, press the ALM2/VOL- button instead of the ALM1/VOL+ button in the instructions above.
By following these steps, you can easily set the alarm time and choose between buzzer or radio mode on the Naxa NRC-181 Bluetooth Dual Alarm Clock.
Add New Comment