User Manual Q&AAnswer
Dec 11, 2024 - 09:32 PM
To connect external speakers to the Weltron WA-612E amplifier, follow these steps:
1. Locate the speaker output terminals on the rear panel of the amplifier.
2. Choose the appropriate speaker output connection based on your speaker's impedance. The amplifier supports low-impedance speakers with a minimum load impedance of 8 ohms.
3. For low-impedance speakers, use the speaker xxxx terminals. Ensure that the speakers are wired in such a way that the load impedance is between 4 ohms and 16 ohms.
4. Connect the positive (+) terminal of the speaker to the positive (+) terminal of the corresponding speaker output on the amplifier.
5. Connect the negative (-) terminal of the speaker to the negative (-) terminal of the corresponding speaker output on the amplifier.
6. Repeat steps 4 and 5 for each speaker you want to connect.
7. Ensure that all connections are secure and properly tightened.
8. Power on the amplifier and adjust the volume controls accordingly.
Please refer to the user manual for additional information and diagrams on speaker connections.
Add New Comment