User Manual Q&AAnswer
Dec 11, 2024 - 07:58 AM
To adjust the RF output frequency of the SPT 15-TV06S AV Digital Modulator, follow these steps:
1. Access the modulator's settings through the front panel controls. Familiarize yourself with the buttons and display indicators on the front panel.
2. Look for the option to adjust the RF output frequency. The specific location and labeling may vary depending on the model and firmware version.
3. Use the appropriate buttons or controls to increase or decrease the frequency. The modulator typically allows you to adjust the frequency within a specified range.
4. Set the RF output frequency to a value that is compatible with your TV tuners. Refer to the user manual or the specifications of your TV tuners to determine the supported frequency range.
5. Once you have adjusted the frequency, save the changes if necessary. Some modulators automatically save the settings, while others may require you to manually save the configuration.
Note: It is important to ensure that the RF output frequency is compatible with your TV tuners or televisions. Using an incompatible frequency may result in poor signal reception or no reception at all. Always refer to the user manual provided with the modulator for specific instructions on adjusting the RF output frequency.
Add New Comment