User Manual Q&AAnswer
Dec 11, 2024 - 07:35 AM
To connect the Monolith 24456 THX subwoofer to your audio system, follow these steps:
1. Power off and unplug all equipment to be connected.
2. Using a single mono RCA cable, plug one end into one of the LFE & LINE UNBALANCED INPUTS on the subwoofer.
3. Plug the other end of the RCA cable into the dedicated subwoofer or LFE output on your receiver.
4. Plug one end of the included AC power cable into the FUSE/120 VAC connector on the subwoofer.
5. Plug the other end of the AC power cable into a nearby AC power outlet.
6. Power on all connected equipment.
7. Set the POWER switch on the subwoofer to the AUTO ON/OFF or ALWAYS ON position, as desired.
8. Using the information in the PRODUCT OVERVIEW section of the manual, set the controls on the subwoofer to the desired starting positions, then adjust as needed.
Please note that these instructions are based on the assumption that your audio system has a subwoofer/LFE output. If you have a different type of output or need further assistance, please consult the manual or contact Monoprice Customer Service for additional support.
Add New Comment