User Manual Q&AAnswer
Dec 11, 2024 - 07:33 AM
To connect the PLX-CRSS12 turntable to your computer via USB for recording, please follow these steps:
1. Make sure your computer is turned on and running the appropriate software for recording vinyl (e.g., Audacity, Ableton Live, etc.).
2. Locate the USB cable included in the box. One end of the cable has a standard USB Type-A connector, while the other end has a USB Type-B connector.
3. Connect the USB Type-B end of the cable to the USB output port on the back of the turntable.
4. Connect the USB Type-A end of the cable to an available USB port on your computer.
5. Once the turntable is connected to your computer, it should be recognized as an audio input device. You may need to select the turntable as the input source in your recording software.
6. Refer to the instruction manual for your specific recording software to learn how to configure the settings for recording from an external audio source.
7. Start the recording software and adjust the input levels as needed. You can monitor the audio through your computer's speakers or headphones.
8. Place a vinyl record on the turntable and start playback. The audio signal will be sent from the turntable to your computer via the USB connection.
9. Follow the recording software's instructions to start and stop the recording, save the audio file, and apply any desired effects or edits.
Please note that the specific steps may vary depending on your computer's operating system and the recording software you are using. For more detailed information, please refer to the instruction manual provided with the turntable.
Add New Comment