User Manual Q&AAnswer
Dec 11, 2024 - 07:24 AM
The Goldwood GM-560CD/8 Midrange Speaker Horn Driver can be connected to your audio system using various types of connections. Here are some common types of connections you might see on this speaker driver:
1. Terminals: The GM-560CD/8 may have terminal connections for wiring. Look for positive (+) and negative (-) labels on these terminals. You can connect speaker cables from your amplifier or other audio source to these terminals.
2. Nut terminals: Some horn drivers have xxxx terminals that allow you to tighten the screws to hold the speaker wires in place. This ensures a secure and reliable connection.
3. Push terminals: In some cases, the speaker wires can be inserted into appropriate slots on the driver and secured in place by pressing down on the terminals.
4. Connectors: The driver may occasionally have connectors like spade connectors or banana plugs. These connections allow for easy and reliable connection of the speaker wires to the driver.
5. Solder tab: Certain horn drivers feature solder tabs for creating a strong connection between the speaker wires and the driver.
It is important to follow the wiring instructions provided in the user manual of the GM-560CD/8. Make sure the wiring is connected securely and correctly to avoid damage to the driver or poor sound quality.
Please consult the user manual for specific instructions and diagrams on how to connect the GM-560CD/8 to your audio system. If you have any further questions or need assistance, it is recommended to consult knowledgeable audio specialists or refer to the user manual for detailed guidance.
Add New Comment