How do I connect my audio sources to the Rolls SS32 Mini Route 3 Signal Switch? (Rolls SS32 Mini Route 3-Signal Switch User's Manual)

Answer

manuals.plus

Dec 11, 2024 - 06:45 AM

To connect your audio sources to the Rolls SS32 Mini Route 3 Signal Switch, follow these steps:

1. Determine whether you will be operating the unit in stereo or mono mode. This is important to ensure compatibility and prevent any potential damage to your equipment.

2. Identify the input ports on the SS32. These are the ports where you will attach your audio source devices. The SS32 typically has four stereo RCA jacks and four 1/8" Tip-Ring-Sleeve jacks for input/output and pass-through connections.

3. If you are using stereo RCA jacks, connect the left and right channels of your audio sources to the corresponding RCA jacks on the SS32. If you are using 1/8" Tip-Ring-Sleeve jacks, connect the appropriate cables from your audio sources to the corresponding jacks on the SS32.

4. Identify the A, B, and C jacks on the SS32. These are the jacks where you will connect your output devices or the next stage of your audio signal chain.

5. If you are using stereo RCA jacks for output, connect the left and right channels of your output devices to the corresponding A, B, or C jacks on the SS32. If you are using 1/8" Tip-Ring-Sleeve jacks, connect the appropriate cables from your output devices to the corresponding jacks on the SS32.

6. Once all the connections are made, use the mechanical toggle switch on the SS32 to select the desired input source (A, B, or C) and route it to the common output jacks.

Please refer to the user manual for further details and illustrations on connecting your specific audio sources to the Rolls SS32 Mini Route 3 Signal Switch.