User Manual Q&AAnswer
Dec 11, 2024 - 06:24 AM
To switch between input sources on the Portta N2SW21BX HDMI Switch, you can follow these steps:
1. Using the Buttons on the Device:
a. Locate the buttons on the front or top panel of the HDMI switch.
b. Each input source is typically assigned a number or label (e.g., Port 1, Port 2).
c. Press the corresponding button for the input source you want to switch to.
d. The output display should now show the selected input source.
2. Using the Remote Control (if included):
a. Point the remote control towards the HDMI switch.
b. Press the button on the remote control that corresponds to the input source you want to switch to.
c. The output display should now show the selected input source.
Note: Make sure that all connected devices are powered on and properly connected to the HDMI switch. Also, ensure that the HDMI output of the switch is connected to your HDMI display or monitor.
For more detailed instructions and information specific to your model, please refer to the user manual provided with the Portta N2SW21BX HDMI Switch.
Add New Comment