User Manual Q&AAnswer
Dec 11, 2024 - 05:35 AM
To connect your drive to the Tripp Lite U457-025-G1-WPG USB-C to SATA SSD/HDD Enclosure Adapter, follow these steps:
1. Remove the back cover (side with the xxxx holes) of the SSD/HDD enclosure.
2. Connect your 2.5 in. SATA SSD/HDD to the SATA connector.
3. Once the SATA SSD/HDD is securely in place, replace the back cover, ensuring the xxxx holes line up with one another.
4. Using the included screwdriver, screws, and washers, fasten the 10 screws and washers securely to the enclosure.
Note: In order to comply with IP66 standards, screws need to be properly tightened to the enclosure.
5. Connect the built-in USB 3.1 Type-C cable to an available USB port on your computer.
For more detailed instructions, please refer to the Tripp Lite U457-025-G1-WPG USB-C to SATA SSD/HDD Enclosure Adapter Quick Start Guide.
Add New Comment