User Manual Q&AAnswer
Dec 11, 2024 - 05:32 AM
To connect the PV231EQ to your audio system, follow these steps:
1. Identify the audio source: Determine which device you will be using as the audio source, such as a mixer, player, or audio interface.
2. Locate the input and output connections: On the PV231EQ, you will find XLR input and output connectors on the rear panel. These are balanced connections that provide better audio quality and noise rejection.
3. Connect the audio source to the equalizer: Use XLR cables to connect the output of your audio source (e.g., mixer) to the XLR input connectors (labeled "XLR INPUT") on the PV231EQ. Make sure to connect the left channel output of your source to the left input of the equalizer and the right channel output to the right input.
4. Connect the equalizer to the amplifier or powered speakers: Use another set of XLR cables to connect the XLR output connectors (labeled "XLR OUTPUT") on the PV231EQ to the input of your amplifier or powered speakers. Again, connect the left output of the equalizer to the left input of your amplifier/speakers and the right output to the right input.
5. Power on the equipment: Make sure all devices are powered off before making any connections. Once everything is connected, power on your audio source, equalizer, and amplifier/speakers in the correct sequence as recommended by the manufacturer.
6. Adjust the equalizer settings: Refer to the PV231EQ manual for instructions on adjusting the equalizer settings. Each band on the equalizer can be adjusted using the sliders provided to boost or cut specific frequency ranges.
By following these steps, you should be able to successfully connect the PV231EQ to your audio system and start adjusting the frequency response to achieve your desired sound.
Add New Comment