User Manual Q&AAnswer
Dec 11, 2024 - 05:16 AM
To charge the ORACURA OC200 Smart Plus Water Flosser, follow these steps:
1. Take out the charging point rubber and insert the water flosser plug securely into the charging point socket. Make sure there are no traces of liquid inside the socket before inserting the plug.
2. Connect the charging adaptor to a power outlet.
3. The "CH" indicator will blink when the water flosser is charging. It will turn off once the flosser is fully charged.
4. After charging, cover the charging point again with the charging point rubber. If the "CH" indicator blinks during or after water flossing, it means that the battery needs to be recharged. Full recharging will take about 4 hours.
Note: Avoid using water warmer than 40°C.
Add New Comment