User Manual Q&AAnswer
Dec 11, 2024 - 04:30 AM
To connect your audio sources to the Ashly FX500.2 amplifier, you have two options: balanced Mic/Line inputs using Euroblock connectors or unbalanced RCA inputs. Here's how you can make the connections:
1. Balanced Mic/Line Inputs (using Euroblock connectors):
a. Identify the audio sources you want to connect, such as microphones or line-level devices.
b. Use balanced cables (XLR or TRS) to connect the audio sources to the Euroblock connectors on the amplifier's rear panel.
c. Strip the cable ends and insert the corresponding wires into the Euroblock connectors. Make sure to match the positive (+), negative (-), and ground (GND) connections correctly.
d. Tighten the Euroblock connectors to secure the connections.
2. Unbalanced RCA Inputs:
a. Identify the audio sources you want to connect, such as CD players or media players.
b. Use RCA cables to connect the audio sources to the RCA input connectors on the amplifier's rear panel.
c. Plug one end of the RCA cable into the audio source's RCA output jacks and the other end into the RCA input connectors on the amplifier.
d. Ensure a secure connection by firmly plugging in the RCA cables.
Note: The Ashly FX500.2 amplifier provides both balanced and unbalanced input options, allowing you to choose the most suitable connection method for your audio sources.
For more detailed instructions and illustrations, please refer to the User Manual and Quick Start Guide included with the amplifier.
Add New Comment