User Manual Q&AAnswer
Dec 11, 2024 - 04:25 AM
To pair the JIB/BT4R Bluetooth Receiver with your Bluetooth-enabled device, follow these steps:
1. Power on the receiver by flipping the POWER switch to "ON". The receiver will immediately enter pairing mode.
2. Make sure the Bluetooth feature on your device is turned on and within range of the receiver.
3. In your device's Bluetooth settings, locate and select the receiver (JIB/BT4R) to connect.
- Note: The "PAIR" LED on the receiver will slowly flash blue once paired.
4. Start playing audio on your Bluetooth-enabled device.
- Note: While audio is playing, the "PAIR" LED on the receiver will remain a solid blue.
For more detailed instructions and troubleshooting tips, refer to the "Receiver Bluetooth Pairing and Unpairing" section in the Galaxy Audio JIB/BT4R Dual XLR Bluetooth Receiver User's Manual.
Add New Comment