User Manual Q&AAnswer
Dec 11, 2024 - 03:40 AM
To switch between manual and automatic modes on the ISTOYALL 73005 Electric Balloon Pump, follow these steps:
1. Locate the power switch on the pump. It is usually located on the side or front of the pump.
2. To use the manual mode, simply press the power switch to turn on the pump. The pump will start inflating the balloon as soon as the nozzle is pressed down. Release the nozzle to stop the inflation.
3. To use the automatic mode, press the power switch to turn on the pump. Then, locate the mode switch on the pump. It is usually labeled as "Manual/Auto" or "M/A". Slide the mode switch to the "Auto" position.
4. In the automatic mode, the pump will inflate the balloon automatically once the nozzle is pressed down. It will continue to inflate the balloon until it reaches the desired size, and then automatically stop.
Note: If you are having trouble finding the mode switch or experiencing any difficulties with switching between modes, please refer to the user manual or contact ISTOYALL customer support for further assistance.
Add New Comment