User Manual Q&AAnswer
Dec 11, 2024 - 03:34 AM
To inflate tires using the Kensun A58B Air Compressor, follow these steps:
1. xxxx the connector on the air valve stem of the tire you want to inflate.
2. Plug the power cord into a power outlet. If using the 12V DC mode, plug the 12V DC adaptor into your vehicle's 12V accessory socket.
3. Press the AC or DC button on the front of the inflator, depending on the power source you are using.
4. Monitor the pressure gauge and wait until the pressure reaches the desired value.
5. Once the desired pressure is reached, press the AC or DC button again to stop the inflation process.
Make sure to check the manufacturer's maximum pressure rating for the tires you are inflating to avoid overinflation.
Add New Comment