User Manual Q&AAnswer
Dec 11, 2024 - 03:24 AM
To connect the SIIG CB-DP0Y11-S1 DisplayPort to VGA Converter Cable to your laptop or desktop, please follow these steps:
1. Make sure your laptop or desktop has a Mini DisplayPort output and the VGA display has a VGA input.
2. Turn off your laptop or desktop and the VGA display.
3. Locate the Mini DisplayPort on your laptop or desktop. It is a small rectangular port usually labeled with the Mini DisplayPort symbol.
4. Take one end of the SIIG CB-DP0Y11-S1 converter cable (the end with the Mini DisplayPort connector) and insert it firmly into the Mini DisplayPort on your laptop or desktop. Make sure it is fully inserted.
5. Locate the VGA input on your VGA display. It is a larger rectangular port usually labeled with "VGA" or "RGB".
6. Take the other end of the converter cable (the end with the VGA connector) and insert it firmly into the VGA input on your VGA display. Make sure it is fully inserted.
7. Turn on your laptop or desktop and the VGA display.
8. The display settings on your laptop or desktop should automatically detect the VGA display and configure the appropriate resolution. If not, you may need to manually adjust the display settings on your laptop or desktop.
9. Once the connection is established, you should see the display from your laptop or desktop on the VGA display.
Note: If you encounter any issues with the connection or display, please refer to the user manual provided with the SIIG CB-DP0Y11-S1 DisplayPort to VGA Converter Cable for troubleshooting steps and additional information.
Add New Comment