User Manual Q&AAnswer
Dec 11, 2024 - 03:07 AM
To connect your laptop with a DisplayPort output to a VGA monitor using the Tripp Lite P134-06N-VGAV-2BP adapter, follow these steps:
1. Make sure your laptop and monitor are powered off.
2. Locate the DisplayPort output on your laptop and the VGA input on your monitor.
3. Take the male end of the adapter (DisplayPort) and insert it into the DisplayPort output on your laptop.
4. Connect the VGA cable from your monitor to the female end of the adapter (VGA).
5. Ensure that the connections are secure and properly aligned.
6. Power on your laptop and monitor.
7. The display should automatically detect the connection and configure the settings accordingly. If not, you may need to adjust the display settings on your laptop manually.
8. Once the connection is established, you should see the laptop's display mirrored or extended on the VGA monitor.
Please note that audio is not supported by this adapter, so you may need a separate audio solution if your laptop supports audio over DisplayPort.
For more detailed instructions or troubleshooting tips, refer to the user manual provided with the Tripp Lite P134-06N-VGAV-2BP adapter.
Add New Comment