User Manual Q&AAnswer
Dec 11, 2024 - 02:59 AM
Charging the NONITON AN-002 Cordless Water Flosser is a simple process. Here are the step-by-step instructions:
1. Take the USB cord that came with the device.
2. Connect one end of the USB cord to the charging port on the water flosser.
3. Plug the other end of the USB cord into a power source, such as a wall adapter or a computer's USB port.
4. The water flosser's LED indicator will light up, indicating that it is charging.
5. Leave the water flosser connected to the power source until it is fully charged.
6. The charging time may vary, but it usually takes around 4-6 hours to fully charge the water flosser.
7. Once the water flosser is fully charged, the LED indicator will turn off or change color to indicate a full charge.
8. Disconnect the USB cord from the water flosser and the power source.
It is important to note that the water flosser has a long battery life and can be used continuously for up to 15 days on a single charge. Make sure to charge the water flosser as needed to ensure optimal performance.
Add New Comment