User Manual Q&AAnswer
Dec 11, 2024 - 02:27 AM
To switch between the manual and automatic mode on the ELLECK 73005 Balloon Inflator Pump, follow these steps:
1. Locate the on/off switch on the inflator pump. It is usually located on the side or top of the pump.
2. Set the switch to the "On" position to activate the pump.
3. To use the manual mode, simply press down on the nozzle to start the inflation process. Release the pressure on the nozzle to stop inflation.
4. To use the automatic mode, press down on the nozzle and slide the lever or switch to the "Automatic" position. This will allow continuous inflation without the need to hold down the nozzle.
5. When you have finished inflating the balloons, switch the on/off switch to the "Off" position to turn off the pump.
Please refer to the user manual for any additional information or troubleshooting tips regarding the operation of the ELLECK 73005 Balloon Inflator Pump.
Add New Comment