How do I set up the XtremPro 61007 HDMI Over IP KVM Extender? (XtremPro 61007 HDMI Over IP KVM Extender User Manual)

Answer

manuals.plus

Dec 11, 2024 - 02:11 AM

To set up the XtremPro 61007 HDMI Over IP KVM Extender, please follow these steps:

1. Transmitter Unit (Sender):
- Connect the HDMI output of your source device (computer, video player, etc.) to the HDMI input of the transmitter unit using a regular HDMI cable.
- Connect USB devices (keyboard, mouse, USB drive, etc.) to the USB ports on the back of the transmitter unit.
- Use an Ethernet cable to connect the transmitter unit to the network switch or router that controls your network.
- Connect the power adapter to a working outlet to provide power to the transmitter unit.
- If the extender supports extending infrared (IR) signals, connect an IR extension cable to the IR port on the transmitter unit.

2. Receiver Unit (Receiver):
- Use an HDMI cable to connect the HDMI input on your display (monitor, TV, projector, etc.) to the HDMI output on the receiver unit.
- Connect USB devices (keyboard, mouse, or other input device) to the available USB ports on the receiver unit.
- Use an Ethernet cable to connect the receiver unit to the network switch or router.
- Connect the power adapter to the receiver unit to supply power.
- If the extender supports extending IR signals, attach an IR extension cable to the IR connector on the receiver unit.

3. Network Configuration:
- Ensure that both the transmitter and receiver units are connected to the same network subnet.
- Depending on the extender, you may need to specify IP addresses, subnet masks, and other network settings on the devices. Refer to the extender's manual for detailed instructions on network setup.

4. Final Steps:
- Check that all connections are secure and properly plugged in.
- Power on both the transmitter and receiver units.
- Follow the instructions provided in the extender's manual to configure any necessary network settings.
- Turn on the display and the source device.
- You should now be able to control the source device remotely and view its output on the display as if they were locally connected.

Please note that it is important to read and understand the user manual provided by the manufacturer for complete and accurate setup instructions specific to the XtremPro 61007 model.