User Manual Q&AAnswer
Dec 11, 2024 - 02:03 AM
To switch between different HDMI sources using the Portta N4SW31C HDMI switch, follow these steps:
1. Ensure that all your HDMI source devices (such as gaming consoles, Blu-ray players, streaming devices) are properly connected to the HDMI inputs on the Portta HDMI switch. You should have three HDMI input ports labeled Input 1, Input 2, and Input 3.
2. Connect the HDMI output of your TV, monitor, or projector to the HDMI output of the Portta HDMI switch.
3. Plug the power adapter that came with the HDMI switch into a power outlet and connect it to the power input on the switch.
4. Make sure there is a clear line of sight between the IR remote control and the IR sensor on the HDMI switch.
5. To switch between HDMI sources, use the included IR remote control. Press the "Input" or "Source" button on the remote control to cycle through the connected HDMI devices. Each press of the button will switch to the next HDMI input.
6. The selected HDMI source will be displayed on your TV, monitor, or projector.
Note: If you are experiencing any issues with switching between HDMI sources, try power cycling the HDMI switch and the connected devices by turning them off and then back on again.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the Portta N4SW31C HDMI switch.
Add New Comment