User Manual Q&AAnswers
Dec 11, 2024 - 01:40 AM
To charge the , follow these steps:
1. Use the USB charging cable provided in the package.
2. Connect one end of the USB cable to the charging port located on the bottom of the oral irrigator.
3. Connect the other end of the USB cable to a power source, such as a computer USB port or a USB wall adapter.
4. The device will start charging automatically. The LED indicator light on the device will illuminate to indicate that it is charging.
5. Allow the device to charge until it reaches a full charge. The charging time may vary, but it typically takes around 4-6 hours for a full charge.
6. Once fully charged, disconnect the USB cable from the device.
Note: It is recommended to fully charge the device before the first use. Additionally, make sure to keep the device dry while charging and avoid using it while it is connected to the charger.
Dec 11, 2024 - 01:45 AM
To charge the Grinest FL-V35 Oral Irrigator, follow these steps:
Locate the Charging Port:The FL-V35 typically features a USB charging port, which is usually covered by a waterproof flap to maintain the device's water resistance.
Connect the Charger: Plug the provided USB cable into the charging port of the irrigator. Connect the other end of the cable to a USB power adapter, computer, or power bank.
Check the Indicator Light: The device usually has an LED indicator that lights up during charging. The light may change (e.g., turn off or shift colors) once fully charged. Refer to the user manual for the exact indicator behavior.
Charging Time: It typically takes 3–4 hours to fully charge, but exact times may vary depending on the power source.
Post-Charging: Unplug the cable and ensure the waterproof flap is securely closed to maintain the device's water resistance.
Make sure you use the provided USB cable and avoid overcharging to preserve battery life.
Add New Comment