User Manual Q&AAnswer
Dec 11, 2024 - 01:20 AM
To connect the AVInAir AV-SF-HVG102B HDMI to VGA Converter to your devices, please follow these steps:
1. Ensure that your laptop and VGA monitor are turned off.
2. Connect one end of an HDMI cable to the HDMI output port of your laptop.
3. Connect the other end of the HDMI cable to the HDMI input port of the AV-SF-HVG102B Converter.
4. Connect one end of a VGA cable to the VGA input port of the Converter.
5. Connect the other end of the VGA cable to the VGA input port of your VGA monitor.
6. If you want to use audio, connect a 3.5mm audio cable from the audio output port of the Converter to your speakers or headphones.
7. Connect the USB power cable to the USB power input port of the Converter.
8. Plug the other end of the USB power cable into a USB power source, such as a USB wall adapter or a USB port on your laptop.
9. Turn on your laptop and VGA monitor.
10. Use the input/source selection on your VGA monitor to switch to the VGA input.
11. The AV-SF-HVG102B Converter should now convert the HDMI signal from your laptop to a VGA signal and display it on your VGA monitor.
Note: Make sure to check the user manual for any specific instructions or settings related to your AVInAir AV-SF-HVG102B Converter model.
Add New Comment