User Manual Q&AAnswers
Dec 11, 2024 - 12:54 AM
To charge the Vtiisamao JYQ001 Dental Calculus Remover, follow these steps:
1. Use the Type C USB cord that came with the device.
2. Connect one end of the USB cord to the charging port on the device.
3. Plug the other end of the USB cord into a power source, such as a USB wall adapter or a computer's USB port.
4. The device will start charging. The LED indicator on the device will show the charging status. It will turn red when charging and green when fully charged.
5. Leave the device connected to the power source until it is fully charged. The charging time may vary, but it usually takes around 2-3 hours to fully charge the device.
6. Once the device is fully charged, disconnect it from the power source.
Note: It is recommended to fully charge the device before using it for the first time, as the battery might not be fully charged when you receive it. Regularly check the battery level and recharge the device when needed to ensure uninterrupted usage.
Dec 11, 2024 - 12:56 AM
To charge the Vtiisamao JYQ001 Dental Calculus Remover, follow these steps:
1. Use the Type C USB cord that came with the device.
2. Connect one end of the USB cord to the charging port on the device.
3. Connect the other end of the USB cord to a power source, such as a USB wall adapter or a computer.
4. Ensure that the device is properly connected and the charging port is securely plugged in.
5. The device will start charging. You can check the battery level by referring to the LED indicator on the device.
6. Allow the device to charge fully before using it. The recommended charging time is stated in the user manual.
7. Once fully charged, disconnect the USB cord from the device and the power source.
Note: It is important to charge the battery first before using the device, as it may not be fully charged when you receive it. Regularly check the battery level and recharge the device when needed to ensure uninterrupted usage.
Add New Comment