User Manual Q&AAnswer
Dec 11, 2024 - 12:29 AM
To inflate your paddle board using the Polotrag PTG-012 Paddle Board Pump, follow these step-by-step instructions:
1. Connect the air hose with the inflation inlet: Attach one end of the air hose securely to the pump's inflation inlet.
2. Connect the car plug to the 12V DC outlet and start the car engine: Plug the power adapter into your vehicle's 12V DC outlet and start the engine to power the pump.
3. Connect the air hose with the SUP: Attach the other end of the air hose to the stand-up paddleboard's (SUP) inflation valve. Ensure it is securely attached.
4. Set the desired pressure: Press the "+" or "-" button on the pump's control panel to set the desired pressure for your paddle board. The digital display screen will show the current pressure setting.
5. Start the inflation process: Press the start button on the pump to begin inflation. The pump will automatically shut off once the preset pressure is reached, preventing over-inflation.
Note: If the desired pressure is not reached, you can adjust the pressure setting using the "+" or "-" buttons and repeat step 5.
By following these steps, you will be able to inflate your paddle board using the Polotrag PTG-012 Paddle Board Pump effectively. For further details and safety instructions, please refer to the user manual provided with the product.
Add New Comment