User Manual Q&AAnswer
Dec 09, 2024 - 04:35 AM
To use the deflation function of the OutdoorMaster SHARK II 20PSI High-Pressure SUP Air Pump, please follow these steps:
1. Ensure that the pump is disconnected from the power source and that the paddleboard is in a suitable location for deflation.
2. Locate the deflation nozzle attachment included with the pump. It should be labeled or distinct from the other nozzles.
3. Attach the deflation nozzle to the valve on your paddleboard. Make sure it is securely connected to prevent air leakage.
4. Once the nozzle is attached, switch the pump to the deflation mode. This mode is usually indicated by a symbol or label on the pump.
5. Turn on the pump and allow it to deflate the paddleboard. The pump will draw air out of the paddleboard, causing it to deflate.
6. Monitor the deflation process and ensure that the paddleboard is deflating evenly. If you notice any issues or uneven deflation, check the connection between the nozzle and the valve for any leaks or obstructions.
7. Once the paddleboard is fully deflated, turn off the pump and disconnect the deflation nozzle from the valve.
8. Carefully fold or roll up the paddleboard, removing any remaining air, and secure it for storage.
Please refer to the user manual for specific instructions and diagrams related to the deflation function of the OutdoorMaster SHARK II 20PSI High-Pressure SUP Air Pump.
Add New Comment