User Manual Q&AAnswer
Dec 09, 2024 - 04:32 AM
Here is a step-by-step guide on how to inflate balloons using the AGPtek BP3-EU High Power Electric Balloon Inflator Pump:
1. Setup: Plug the balloon pump into a wall outlet and attach a new balloon to the semi-auto port.
2. Inflation: Press down on the semi-auto port to start inflating the balloon. The pump will begin blowing air into the balloon.
3. Completion: Release the semi-auto port once the balloon is inflated to the desired size. The pump will automatically stop inflating.
For smaller balloons, you can use the extension nozzles provided with the pump. Simply attach the nozzle to the semi-auto port and follow the same steps mentioned above.
The switch on the pump has three settings: "O" to stop running, "—" for handle operation (manual mode), and "=" for automatic operation. Use the appropriate setting based on your preference and the type of balloons you are inflating.
Please note that the AGPtek BP3-EU is not suitable for inflating high-pressure or long skinny balloons. It is designed for use with standard latex and decorative balloons.
For more detailed instructions and safety information, please refer to the user manual included with the product.
Add New Comment