User Manual Q&AAnswer
Dec 09, 2024 - 04:28 AM
To switch between the automatic and manual modes on the DEMELA 73005S Portable Air Balloon Pump, follow these steps:
1. Automatic Mode:
- Connect the plug to an AC 110-120V socket.
- Set the power switch to the "two" position.
- Cover the inflation nozzle with the balloon to inflate.
- Switch off to stop inflation.
2. Manual Mode:
- Connect the plug to an AC 110-120V socket.
- Set the power switch to the "one" position.
- Cover the inflation nozzle with the balloon and slightly push the nozzle down to inflate.
- Release the nozzle when the balloon reaches the desired size.
By adjusting the power switch to either the "one" or "two" position, you can switch between the manual and automatic modes of the balloon pump. Make sure to follow the instructions carefully to ensure proper operation.
Add New Comment