User Manual Q&AAnswer
Dec 09, 2024 - 03:54 AM
To change the measurement function on the Proster BM4070 Digital LCR Multimeter, follow these steps:
1. Locate the function selection dial on the multimeter. It is usually located on the front panel and labeled with the respective measurement functions (R, C, L).
2. Turn the function selection dial to the desired measurement function. For example, if you want to measure resistance, turn the dial to the "R" position. If you want to measure capacitance, turn the dial to the "C" position. And if you want to measure inductance, turn the dial to the "L" position.
3. Once you have selected the desired measurement function, the multimeter is ready to measure the corresponding parameter. Make sure to connect the test leads to the appropriate terminals and the component you want to measure.
4. Read the measurement value on the LCD screen. The multimeter will display the measured value with the corresponding unit (ohms for resistance, farads for capacitance, and henries for inductance).
Note: It is important to select the correct measurement function to ensure accurate readings. Using the wrong function may result in incorrect measurements or no readings at all.
For more detailed instructions and information, please refer to the Proster BM4070 Digital LCR Multimeter Instruction Manual provided with the product.
Add New Comment